2013 FURUKAWA HCR1500ED Track Mounted Drill Rig

Item No
12953
Condition
Used
Manufacturer
Furukawa
Status
Available
Model Year
2013
Model No
HCR1500ED
Quantity
1
Price
Description

  • 2013 FURUKAWA HCR1500ED Track Mounted Drill Rig
  • CAT C9 Diesel Engine
  • HD715 DRIFTER AND DUAL DAMPENING SYSTEM
  • MACHINE 1307 HOURS
  • DRIFTER 546
  • 3CMI  INDCATIOR
  • WATER
  • REAR BUMPER
  • 84' DRILLING DEPTH
  • 1400 CFM DUST COLLECTOR WITH 6 FILTERS
  • 3-1/2"-5.0" BIT DIAMETER
  • ESPAR ENGINE HEATER
  • Low Hours
  • Located in Mifflinburg, PA yard USA
  • Specifications for the HCR1500-ED II / HCR1500-D20 II:
  • Weight & Dimensions:

 

US Standard

Metric

Operating weight with fuel/oil (with ROPS/FOPS cab if applicable)

39,286 lb / 40,616 lb

17,820 kg / 18,420 kg

Overall length

32'-10" / 33'-5.5"

10,010 mm / 10,200 mm

Ground contact length

9'-1" / 9'-5"

2,780 mm / 2,865 mm

Overall width with pre-cleaner

12'-2" / 12'-8"

3,720 mm / 3,860 mm

Overall width

7'-10.5"

2,400 mm

Width of shoe

13"

330 mm

Overall height shipping

11' / 11'-2"

3325 mm / 3,400 mm

  • Drifter

 

Model

HD715 II

Weight

551 lb

250 kg

Impact rate

2,250 - 2,500 bmp

Number of rotations

0 - 150 rpm

Undercarriage

Ground clearance

20.4" / 19.2"

515 mm / 495 mm

Oscillating angle

±7.5° deg

Travel speed

0 - 2.6 mph

0 - 4.2 km/h

Max grade of hill climb

57.7 (30°) %

Engine

Make/model

CATERPILLAR® / C9

Type

Turbocharged and air to air after cooled diesel, 

direct fuel injection, electronic governor.

Rated output

348hp / 2200rpm

260kw / 2200rpm

 

Meets Tier III and EU stage-3

Low-emission, low fuel consumption Tier III Caterpillar® engine meets major exhaust emissions regulations in US and Europe.

Net usable output available at flywheel of the installed engine with all the standard accessories. SAEJ1349, SAEJ1995 conditions.

Piston displacement

2.3 gal

8.8 liter

Fuel tank capacity

166 gal

630 liter

Hydraulic pump

Type

2-variable displacement axial piston pumps; largest for travel, impact and feed, smaller for drifter rotation. 3-gear pumps for cooling and dust collector, boom and rod changer.

Hydraulic oil tank capacity

63 gal

240 liter

  •  

Specifications

HCR1500-ED II / HCR1500-D20 II

 

US Standard

Metric

Compressor

AIRMAN®

Model

PDS290-S15B

Free air delivery

476.4 CFM

13.5 m3/min

Working air pressure

149 psi

1.03 MPa

Boom

Model

JE326-142 / JE325-141

Lift angle (up-down)

45° - 20° / 45° - 25°

Swing angle (right-left)

38° - 7° / 35° - 7°

Extension length

2.9 ft

900 mm

Guide shell

Model

GH885-41 / GH830-51

Length

26'-2" / 33'-5"

8,000 mm / 10,200 mm

Feed length

26'-2" / 33'-5"

4,700 mm / 6,763 mm

Swing angle (right-left)

38° - 38° / 25° - 90°

Tilt angle

170°

Maximum pulling force

6,969 lbs

31kN

Dust collector

Suction capacity

1,400 CFM

40 m3/min

Number of filter

6

Rod arrangement

Type

Rod changer

Number of rods

6 + 1 / 4 + 1 (starter rod)

Bit and rod

Bit diameter

3.5" - 5"

89 mm - 127 mm

Type of bit

Cross, Button, Spike

Rod size

51R

Rod length

12' / 20'

3,660 mm / 6,100 mm

Starter rod length

14' / 20'

4,300 mm / 6,100 mm