2012 Casagrande C7 Hydraulic Crawler Drill Rig

Item No
14065
Condition
Used
Manufacturer
Casagrande
Status
Sold
Model Year
2012
Model No
C7 Hydraulic Crawler Drill
Quantity
0
Price
Sold
Description

  • 2012 Casagrande C7 Hydraulic Crawler Drill Rig
  • Hours: 4926 hours
  • Undercarriage with tracks driven by hydraulic motors coupled to planetary reduction gears
  • Width of track shoes: 500mm
  • Length of crawlers: 3628mm
  • Travel speed: 0 – 1.5 Km/h.
  • Ground pressure: 6.60 N/cm2.
  • Soundproofed Deutz diesel engine;
  • TCD 2012 L06 2V rated power 147 Kw (200 hp) AT 2300 RPM.
  • 16" Drill Clamp
  • Fuel Tank 350 L
  • Two main hydraulic variable displacement piston pumps capacity 218 + 218 l/m, 250 bar maximum working pressure.
  • Aux variable displacement piston pump capacity 65 l/min, 220 bar max working pressure.
  • Oil tank 700 L
  • Completed radio remote controlled;
  • Fabricated steel mast, swivel mounted on heavy duty support arm.
  • Mast movements are by means of hydraulic cylinders which give good maneuverability.
  • Operating weight: Approximately 22 metrics tons. 
  • Fabricated steel mast, 12165 mm long.
  • 10400 mm stroke of the rotary head with fixed clamps.
  • 9950 mm stroke of the rotary head with sliding breakout clamp.
  • Crowd force: 40Kn
  • Extraction force: 80 kN.
  • Max crowd/extraction speed: 43 m/min.
  • Hydraulic motors displacement regulation kit T2000 / T2500 type rotary heads.
  • Rotary Head Type T2500 with offhole slide; Main features of the rotary head are:
  • Two variable displacement motors
  • Max. rotation speed: 22 rpm.
  • Max. torque: 20.0 kNm.
  • Max. working pressure: 260 bar.
  • Trough-hole passage: 200 mm 76 mm ID drive sleeve.
  • Rear swivel for T2500 (for single head configurations)
  • Blocking and break-out clamps type M5 – M5S
  • Working range: 90 – 406 mm.
  • Clamping force: 250 kNm
  • Break-out torque: 45 kNm Set of inserts 405 mm dia. centering device.
  • A2 type hydraulic service winch
  • Line pull: 20 Kn
  • Max. rope speed: 54 m/min
  • Hydraulically operated jib
  • Application for Gamma 202 + C35 type pumps
  • Triplex foam pump type C35
  • Working pressure: 50 bar.
  • Flow: 30 l/min.
  • Power consumption: 3 Kw.
  • Hose reel complete with pressure washer wand.
  • Water piston pump model Gamma 202.
  • Working order, may need service and cleaning (can paint for additional cost if needed)
  • Financing Available
  • Located in Eastern Region, USA


Back Print