|
|
1978 Ingersoll-Rand T4W DH
Item No: 32
Model: T4W DH
Year: 1978
Price:
Contact us |
IR XHP 1050 cfm / 350 psi (Rebuilt Airend in 2008)
Cummins KTA19C diesel deck engine at 600 HP
Drill Rig was redone and retrofitted in 1996 and over the years after
2 main winches
1 sand line for pulling core samples
DH (Deep Hole) Package with 70,000 |
|
|
1975 Ingersoll-Rand T4W
Item No: 36
Model: T4W
Year: 1975
Price:
Contact us | IR Air compressor 750 cfm / 250 psi, Detroit 12V71 diesel deck engine, 700 ft. of drill pipe (25' X 4 1/2"), 2 Winches, 2 Carousels, Mounted on a CCC (Crane Carrier Company) truck , Location: Greece |
|
|
1974 Ingersoll-Rand T4W
Item No: 37
Model: T4W
Year: 1974
Price:
Contact us | IR 750 cfm / 150 psi air compressor, Detroit 8V71 diesel deck engine, Spur Gear Head, Pullback 50,000 lbs, Mounted on a CCC (Crane Carrier Company), Detroit 6V53 engine, Note - drill rig needs work or Sold "As Is", FOB: Mifflinburg, Pennsylvania |
|
|
1988 Schramm T660
Item No: 42
Model: T660
Year: 1988
Price:
Contact us | GHH 850 cfm / 350 psi air compressor (rebuilt in 2006 w/ low hours since) Detroit 8V92 diesel deck engine (rebuilt in 2008 |
|
|
1998 Reichdrill T690 W
Item No: 53
Model: T690 W
Year: 1998
Price:
Contact us | 6,440 hours, Sullair 1050 cfm / 350 psi air compressor, Mounted on 1998 Freightliner (16,500 miles), QSK19 Cummins diesel deck engine, Regen down, 40,000 pullback, 18,000 lb winch and sand line, Remote control, 18 gpm water injection pump, 8 rod carousel, 10 piece pipe rack, 200 ft. of (4-1/2" x 20') drill pipe, 200 ft. of (4-1/2" x 25') drill pipe, FOB: |
|
|
1990 Reichdrill T625 W
Item No: 54
Model: T625 W
Year: 1990
Price:
Contact us | CAT 3406C diesel deck engine (remanufactured, installed in 2003), Rebuilt top head (since 2004), 20 GPM water injection pump, Comes with 360' of 4" OD x 20' length drill pipe, Mounted on 1989 International truck, DT466 diesel engine, FOB: Eastern |
|
|
1985 Ingersoll-Rand TH60 DH
Item No: 79
Model: TH60 DH
Year: 1985
Price:
Contact us |
IR 750 cfm / 250 psi air compressor
DH (Deep Hole) package with 38' ft Mast
Mounted on a 1985 GMC truck
New Detroit 8V92 T diesel engine in truck (2,500 hours since)
(New since 2008: king head, hydraulic pump, 3 motor gear box, bearings in gear |
|
|
1981 Ingersoll-Rand TH60
Item No: 80
Model: TH60
Year: 1981
Price:
Contact us | IR 750 cfm / 250 psi Air Compressor , Mission Magnum 3X4 Mud Pump (hydraulically driven) , 8 GMP Water Injection , 500' ft of Drill Pipe (20' X 4 1/2" X 3 1/2") included , Mounted on a 1985 GMC truck , Detroit 8V92 T diesel engine (PTO driven) , Shaker Pit available (cost extra) |
|
|
1978 Ingersoll-Rand TH60
Item No: 82
Model: TH60
Year: 1978
Price:
Contact us | IR 750 cfm / 250 psi air compressor, 34' Mast, 26,500 Lbs. Pullback, Hot Box , 7 Rod Carousel which hold (20' X 4 1/2") drill pipe, Rod Rack - holds 12 drill pipe, 3 Jacks , Mounted on a 1978 Paystar 5000 truck, Detroit 8V92 diesel engine (new in 1999 or 2000 with 600 hours estimated) , Misc |
|
|
Chicago Pneumatic
Item No: 105
Model:
Year: N/A
Price:
Contact us | Ford 4 Cylinder Industrial Engine (model# NO8HD), National Transit Mud Pump (2 1/4" X 4" HDPP), (5) Drill Pipe (20') included, Mounted on a 1983 GMC 6500 Truck 4X4, Diesel 8.2 engine, Allison Automatic Transmission, Dimensions and Weight: 28' L, 12' H, 8' W, and 15,000 lbs weight, FOB: Mifflinburg, Pennsylvania |
|
|
1982 Ingersoll-Rand T4 BH
Item No: 153
Model: T4 BH
Year: 1982
Price:
Contact us |
Detroit 12V71N diesel deck engine
IR 900 cfm / 300 psi air compressor
Water Injection 9 GPM Pump
Hammer Oilier
Spur Gear Head
37,500 lbs pullback
Mounted on a CCC (Crane Carrier Company) truck
CAT 3208 diesel engine
New Paint
Ready for Drilling!
FOB: Mifflinburg, Pennsylvania
|
|
|
Foremost Barber DR12/26
Item No: 157
Model: DR12/26
Year: N/A
Price:
Contact us | 1150 CFM / 350 PSI Air Compressor, Cummins Diesel Deck Engine, Lower Rotary Casing Drive, Opening : 24.7" (627mm), Stroke : 12' (3 660mm), Rotation : 0-22rpm, Torque(max) : 1,000,000 lb.in., (113 000Nm), Hoist Capacity : 72,000 lbs (33,000kg), combined with top drive 108,000 lb (49,000kg), Pull Down Capacity : 33,000 lbs (15,000kg), Top Drive, Stroke : 26' (7 930mm), Rotation : |
|
|
1993 Ingersoll-Rand T4W
Item No: 177
Model: T4W
Year: 1993
Price:
Contact us |
Bare Drill Rig - Driller can set up custom rebuild with options below:
50,000 lbs standard Pullback or (add Deephole package with 70,000 lbs Pullback) (option to install)
Detroit 12V92 or Cummins KTA 19C or CAT 3412 T Diesel Deck Engine (option to install)
IR 1250 |
|
|
1993 Driltech T25K3W
Item No: 181
Model: T25K3W
Year: 1993
Price:
Contact us | Serial Number: 731835, Sullair 900 cfm / 350 psi Air Compressor, CAT 3406 diesel deck engine (rebuilt Turbo) & (4,005 hours since replaced) , 30,000 lbs Pullback, Hammer Oilier, CAT 1010 Water injection, 300' ft of Drill Pipe (20¹ X 4 1/2" X 3 1/2") included, Rebuilt: Power Drill Head, Control Panel, Spool Values, Hydraulic Pumps, and |
|
|
1995 Ingersoll-Rand T3W
Item No: 193
Model: T3W
Year: 1995
Price:
Contact us | CAT 3406 diesel deck engine (Reman in 2006) , IR 900 cfm / 350 psi air compressor, 18,000 lbs winch, Bean 15 GPM water injection pump (New), Hydraulic Pump (New), Jib Boom, Hammer Oilier, 400' ft of drill pipe (20' X 4 1/2") included , Mounted on a Ford 9000 Truck, |
|
|
2000 Ingersoll-Rand T3W
Item No: 194
Model: T3W
Year: 2000
Price:
Contact us | CAT 3406 diesel deck engine , IR 900 cfm / 350 psi air compressor, 18,000 lbs winch, New Bean 15 GPM water injection pump, 400' ft of drill pipe (20' X 4 1/2") included, Mounted on an International (6 X 4) Truck , CAT 2674 diesel engine, FOB: Eastern Region, |
|
|
1995 Ingersoll-Rand T3W
Item No: 195
Model: T3W
Year: 1995
Price:
Contact us | 3,150 (low hours), IR HR2 900 cfm / 350 psi air compressor, Rebuilt CAT 3406 Diesel Deck Engine at 450 hp (1800 RPM) (1,000 hours since, rebuilt), 29,000 lbs, 20 GPM Water Injection pump, Hammer Oilier, Jib Boom, 18,000 lbs Main Winch, 6 rod carousel holds (20' X 4 1/2" |
|
|
1988 Speedstar 275 Quickdrill
Item No: 208
Model: 275 Quickdrill
Year: 1988
Price:
Contact us | (Redone in 2008), Mounted on 2001 International 4900 Truck, DT 466 diesel engine, 7,000 hours estimated , Gardner Denver 5X6 Mud Pump (Gear End Rebuilt in 2006), 275 cfm / 150 psi Air Compressor, Rebuilt Transmission and Tranfer/Funk Box, Redone Hydraulic Pumps, Painted in 2008, 200' ft of (20' X 2 7/8" Failing exploration) Drill Rods and Tooling included, Great |
|
|
Russian Drill Rig 1BA-15V
Item No: 209
Model: 1BA-15V
Year: N/A
Price:
Contact us | 1BA-15V Drill Rig (Russian manufacture):, Drill Rigs is Completely Rebuilt with 0 Hours since, Pullback 40,000 lbs, Engine MAZ turgo charger at 265 HP , Rotary table opening is at 15' 3/4" (393mm), Large head and traveling block with 4 wire, 7/8", Mast is 60' ft (18.6 meters), Kelly is 28' ft (8.5 metters), (2) 5X6 Mud Pumps |
|
|
1976 Ingersoll-Rand T3
Item No: 221
Model: T3
Year: 1976
Price:
Contact us | IR 750 cfm / 250 psi air compressor, VT903 Cummins Turbo diesel deck engine, Brand new IR oil cooler, New hydraulic oil cooler, New hydraulic pump, New hydraulic values & controls, Air rotory converted to hydraulic power, 400' ft of drill pipe (20 x 4" w/ 3 1/2" API) , Spare rotory head DRD2 (63.5 to 1 ratio), 20,000 |
|
|
2000 Speedstar 30K
Item No: 222
Model: 30K
Year: 2000
Price:
Contact us | Sullair Compressor1000 cfm / 350 psi , 3X4 Mission mag centrifical pump, 18 GPM Water injection, 25,000 lbs Pullback , 4000 lbs winch, 7,600 Hours, Miles 32,326, Mounted on 5600 International truck, Powered by CAT C-15 diesel engine at 500+ HP 10 Speed Transmission |
|
|
1973 Gardner Denver 1000
Item No: 223
Model: 1000
Year: 1973
Price:
Contact us | 200 CFM/ 150 PSI air compressor, Separate, individual foam and water tanks, 325 # down-the-hole geotechnical sample hammer , 5 1/4" Retracting Table, (3) drums: kelly, free-line, sand, (3) leveling jacks, 18' ft kelly bar, 240' ft of (15' rods), hydraulic through adjustable transmission chainfeed pulldown system, rotary table slips and break-out tongs, 12-volt injection pumps, Mounted on 1973 F-750 Ford |
|
|
1996 Ingersoll-Rand TH100
Item No: 249
Model: TH100
Year: 1996
Price:
Contact us | 850 cfm / 250 psi Air Compressor, Factory Sliding Angle Package (Tower has Gear Driven Slide and Inverter hydraulic cylinders) , Set up for RC (Reverse Circulation) drilling , 6,964 Hours, 20 GPM Bean Pump, Rockdrill Hammer Oilier , Main Winch and Sand Line, Mounted on a Ford LN9000 Truck, Rebuilt Detroit Series 60 Diesel Engine at 430-470 |
|
|
1977 Speedstar SS 15
Item No: 251
Model: SS 15
Year: 1977
Price:
Contact us | 48' Mast (Takes 4 1/2" by 20' or 4 1/2" by 25 & capable of installing 40' casing pipes), 450 cfmi / 250 psi Air Compressor --- New Piston and New Jug, Mounted on a (3) axle CCC (Crane Carrier Company) Truck, 350 Cummins Engine (powering rig and truck) , FOB: Mid-West Region, USA |
|
|
1974 Ingersoll-Rand T4W
Item No: 815
Model: T4W
Year: 1974
Price:
Contact us | IR 750 CFM / 250 PSI Air Compressor, Detroit 8V92 Diesel Deck Engine, Hammer oilier, No water injection, |
|
|
1980 PortaDrill 524
Item No: 1102
Model: 524
Year: 1980
Price:
Contact us | Atlas Copco 600 cfm / 150 psi air compressor , Gardner Denver 5X6 mud pump, 8 1/2" Retractable Table, Kelly (23' 6"), 40,000 lbs Pullback , Hydraulic Jacks, Water Injection Pump (3 cylinders) , Hammer Oilier , Sand Line , Mounted on a 1980 Ford 9000 Truck, Detroit 8V92 diesel engine at 350 HP , Tires: "90%" estimated , 200' ft of |
|
|
Cyclone 36R
Item No: 1131
Model: 36R
Year: N/A
Price:
Contact us | 8 1/2" Retractable Table, 500 PSi / 125 CFM Leroi Air Compressor, Ford 172 Deck Engine (4 cylinder) - runs hydraulics and table, Meyers 9 GPM water injection pump , Included Tooling and Products: , 400' of Drill Pipe, Cable Tools, 6" Hammer & Bits, Mounted on AWD truck Detroit 671 Deisel Engine (runs air compressor and pumps) , All |
|
|
1998 Schramm T450 WS
Item No: 1132
Model: T450 WS
Year: 1998
Price:
Contact us | CAT 3406 Diesel Deck Engine , Sullair 850 CFM / 350 PSI air compressor , 8,600 (low hours) , 8 Rod Carousel (1 year old), Bean Water Injection, 28,000 lbs Pullback , 340' ft of (20' X 4 1/2") Drill Pipe included, (1) 6" Hammer & Bit included , Ready to Work! , Mounted on 1998 International |
|
|
1985 Reichdrill T 700
Item No: 1188
Model: T 700
Year: 1985
Price:
Contact us | CAT 3406 diesel deck engine, GHH 825 cfm / 300 psi air compressor, Mounted on a International truck, Detroit 8V92 engine, FOB: S.W. Region, USA |
|
|
1986 Ingersoll-Rand T4W
Item No: 1195
Model: T4W
Year: 1986
Price:
Contact us | IR HR2 Air Compressor 900 cfm / 350 psi , Cummins KT19 Diesel Deck Engine with 525 hp (Major Engine Overhaul – May 2007), Drill Rods; 300 ft. (25' X 4 1/2"), Rotary Head; 4WF-1-5.3 std, 50,000 lbs Pullback , Meyers 8 GPM Water Injection Pump , Lubricator; Pig Style, Mounted on a CCC (Crane Carrier Company) |
|
|
1996 Driltech D25KW
Item No: 1197
Model: D25KW
Year: 1996
Price:
Contact us | Sullair 900 PSI / 350 CFM air compressor (New compressor oil), CAT 3406 Diesel Deck engine , New 60" breakout wrench, Bean injection pump, 4 hydraulic outriggers, Hammer Oiler, 6 rod carousel, 360' ft of (4.5" x 20') drill rods, 20' ft stabilizer, 6" IR Strike Force & (3) 5" Hammers, Misc Sub & Bits are included |
|
|
1989 Driltech D25KW
Item No: 1221
Model: D25KW
Year: 1989
Price:
Contact us | 1989 Driltech D25KWRedone in 2008, Sullair 825 cfm /350 psi Air Compressor1,100 hours since rebuilt , CAT 3406 Diesel Engine 2,600 hours since rebuilt , Hammer oiler, 2 piston Bean water injection pump, Cab is redone has Heat and New A/C, 90% of Hoses are newer, Newer Paint, Converted controls so one person can load pipe, etc., Jib |
|
|
1991 Ingersoll-Rand TH75
Item No: 1227
Model: TH75
Year: 1991
Price:
Contact us | IR HR-2 Model 900 CFM / 350 PSI rotary screw air compressor , Cummins KTA-19C diesel deck engine at (525 HP), 55,000 lbs. pullback with Twin Inverted Feed Cylinders, main winch 16,000 lbs, single line pull, sand-line winch, CAT water injection pump 3 cylinder , hammer lubricator, Aardvark Slammer casing hammer with hydraulic cylinder |
|
|
1998 Ingersoll-Rand T4W
Item No: 1234
Model: T4W
Year: 1998
Price:
Contact us | Cummins KT-19 Diesel Deck Engine at 600 HPRecently overhauled by Cummins mfg. , IR 1070 cfm / 350 psi air compressor , IR 2.5 High Torch Spur Gear Head , New Paint - Tan color, 1300' ft of drill pipe (25'X 4 1/2"), (1) Atlas Copco QL6 Hammer & 6" Bit, (1) Atlas Copco QL8 |
|
|
1999 Driltech T25K5W
Item No: 1243
Model: T25K5W
Year: 1999
Price:
Contact us | CAT 3406E diesel deck engine, Equipped with Sullair 1000 cfm / 350 psi air compressor, 360' ft of Drill Pipe included, New short block motor on rig compressor in 2007, Mounted on Sterling truck model 9513, Powered by 355 HP diesel engine , 5/99 Chassis , GVWR 66,000, 28,474 original miles, White/Blue paint, FOB: NE Region, USA |
|
|
1989 Failing F-10-WT - Pending Sale
Item No: 1325
Model: F-10-WT - Pending Sale
Year: 1989
Price:
Contact us |
Pending Sale
Brand New Paint
Serial Number: 907079
Cummins 6 Cylinder Auxiliary Diesel Deck Engine
Failing 5X6 mud pump
Moyno Pump
Main 12,000 lbs winch, Safety Drill winch
Gardner Denver FGFXGH 900 lbs Piston Pump
Mast is 16' Long (16" opening can use up to 14" |
|
|
1981 Gardner Denver Falcon 40 RC (Reverse Circulat
Item No: 1347
Model: Falcon 40 RC (Reverse Circulation)
Year: 1981
Price:
Contact us | Mounted on 1989 Ford L9000 Truck , CAT Diesel engine at 425 HP , 10 speed transmission. Truck, 17,000 original miles, 2000 Sullair / GHH 825 cfm / 350 psi Air Compressor (Rebuilt) , 2000 Detroit 2000 Series Diesel Deck engine (550-600 HP), 38 ft Derrick with Angle Drill Package from 30 to 90 degrees |
|
|
1991 Schramm T450
Item No: 1349
Model: T450
Year: 1991
Price:
Contact us | GHH 750 cfm 350 psi Air Compressor (Rebuilt October 2008), Detroit Diesel 8V92 Diesel Deck Engine (Rebuilt April 2008), DTH Down the Hole Hammer, Pullback 40,000 lbs, 300' ft of Drill Pipe (20' X 4 1/2" 3 1/2") available at an extra cost , Ready to Work, Mounted on 1991 Ford F700 Truck , FOB Northwest |
|
|
1994 Schramm T450W
Item No: 1358
Model: T450W
Year: 1994
Price:
Contact us | Sullair 825 cfm 350 psi Air Compressor, Detroit 8V92 Diesel Deck Engine (8,981 hours), Rebuilds Cooling System 2007 , New floating sub - late 2006, Tools included: 8" hammer & bit, 6" hammer & bit, 300' ft of Drill pipe (20' x 4 1/2"), Mounted on a Ford Truck, 34,135 miles , FOB: Central Region, USA |
|
|
1984 Ingersoll-Rand T4W DH
Item No: 1541
Model: T4W DH
Year: 1984
Price:
Contact us | DH (Deep Hole Package) with 70,000 lbs. Pullback IR 900 CFM/ 350 PSI air compressor Detroit 12V71 Turbo Diesel Deck Engine Worm Gear Head 300' ft of used drill pipe (25' X 4-1/2" X 2 7/8" API) included 10 GPM Bean water injection Pig Hammer Oilier |
|
|
1977 Schramm T64HB
Item No: 1542
Model: T64HB
Year: 1977
Price:
Contact us | Detroit 8V71 diesel deck engine (rebuilt with 1,800 hours since), Sullair 750 cfm / 150 psi air compressor, Meyers Water Injection at 10 GPM, Hammer Oilier, Lincoln Welder, Mounted on a Chevy Truck, 427 gas engine, FOB: Eastern Region, USA |
|
|
1987 Driltech D25KW
Item No: 1705
Model: D25KW
Year: 1987
Price:
Contact us | GHH 840 cfm / 350 psi Air Compressor (Rebuilt in 2007) , CAT 3406 Diesel Deck Engine (Rebuilt in 2008) , Bean Water Injection with |
|
|
2006 Atlas Copco T3DH - 50K
Item No: 1738
Model: T3DH - 50K
Year: 2006
Price:
Contact us | T3DH (Deep Hole Package) with 50,000 lbs pullback, 1070 cfm / 350 psi air compressor , CAT C15 diesel deck engine (3,100 hours) , 25 gpm Cat water injection pump, 6 rod carousel, rig mounted rod tray that holds 14 rods, single rod loader, and mounted rod spinner, DHD hammer |
|
|
1994 Driltech D40K
Item No: 1739
Model: D40K
Year: 1994
Price:
Contact us |
(2006 model) Sullair 1350 cfm / 350 psi Air Compressor (500 psi max output)
(1998 or 1999 model) CAT 3408E Turbo diesel deck engine at 700 HP with (5,300 hours) (new Turbo & Injectors)
60,000 lbs Pullback
6 rod carousel with remote control station
20 |
|
|
1988 Jaswell 2400
Item No: 1740
Model: 2400
Year: 1988
Price:
Contact us | Cummins 855 diesel deck engine (5,500 hours), Sullair 900 cfm / 350 psi air compresser (2,500 hours) , 34' ft Tower, 500' ft. of used drill pipe (4 1/2" reg x 20') included , (2) 6" Hammers QL, (1) Stabilizer (12' x 6 5/8" OD) , Bean Pump 25 GPM, Funk Box, Recent Service completed: New pumps, rebuilt |
|
|
1977 Schramm T64HB
Item No: 1746
Model: T64HB
Year: 1977
Price:
Contact us | 425 cfm / 250 psi Air Compressor, Detroit 8V71 diesel deck engine, CAT 1515 water injection pump , Mounted on a 1977 GMC 6500 Chassis Truck , Note: (Truck is going to be removed and the rig will be mounted on a newer Mack truck) , Dimensions for freight: 31' 2" L x 8' W |
|
|
Gardner Denver 1500 WHD
Item No: 1748
Model: 1500 WHD
Year: N/A
Price:
Contact us | Gardner Denver Air Compressor: 750 cfm / 250 psi, Retractable Table: 10" (Rebuilt), Kelly Bar & Bushing: (3 1/2" X 23') , Sandline, Hydraulic Jacks, Air Clutches with Air Dryer, Mud Pump: Piston FM 5 x 6 1/4" (Rebuilt), Water Injection, Oil Injection, Swivel: Little Giant , New Chains & Cables, Truck Mounted on a CCC (Crane Carrier Company) truck , Truck |
|
|
1989 Simco 5000
Item No: 1753
Model: 5000
Year: 1989
Price:
Contact us | Ford 6 Cylinder Diesel Engine , IR 400 cfm / 200 psi Air Compressor , 3 Jacks, Winch , 200' ft of drill pipe, 6” Hammer, and Basic Tooling Included , Mounted on a Ford Truck , Ready to go drilling, FOB: N.E. Region, USA |
|
|
1971 Chicago Pneumatic 650WS
Item No: 1775
Model: 650WS
Year: 1971
Price:
Contact us | Diesel Deck Engine: CAT D333, GHH Air Compressor: 450 cfm / 250 psi, Bean Water Injection: 10 GPM , Drill Pipe: 360'ft (20' X 4 1/2") , New Paint , Truck Mounted: Ford, Gas Engine, Eastern Region, USA |
|
|
1997 Ingersoll-Rand T3W
Item No: 1854
Model: T3W
Year: 1997
Price:
Contact us | CAT 3406 diesel deck engine IR 900 cfm / 350 psi air compressor 18,000 lbs winch, 32,500 lbs Pullback Jib Boom Water Injection Hammer Oilier, 4 Leveling Jacks , Pipe Rack, (2) Driller Stands Mounted on a 1997 MACK model: RD690S Truck Mack diesel engine |
|
|
1982 Mayhew 1000
Item No: 1858
Model: 1000
Year: 1982
Price:
Contact us | Gardner Denver 5 X 6 Mud Pump, Diesel Deck Engine , Takes 15' Drill Pipes , Leveling Jacks, Mounted on 1982 Chevy Truck, Gas Powered Engine , FOB: S.E. Region, USA |
|
|
1978 Failing CF-15 Holemaster
Item No: 1860
Model: CF-15 Holemaster
Year: 1978
Price:
Contact us |
Hours: Rig hours includes driving time, from 1978 to 1995 – 8,059
from 1995 with new hour meter installed to current – 3,766.
Drill Frame: Electric structural steel frame with stringers and reinforced cross members, drill pipe slip holders located on the drill frame, including sliding base and controls |
|
|
Mayhew 1000
Item No: 1864
Model: 1000
Year: N/A
Price:
Contact us | Wheatly 6x6 Mud Pump, 7 1/2" inch Table, Kelly Bar (25' ft X 3 1/2") , Hydraulic Jacks, 200' ft of used drill pipe (20' x 2 7/8) included, Mounted on 1984 International Truck , DT-466 Diesel Engine , FOB: Northern Region, USA |
|
|
1981 Ingersoll-Rand T4W
Item No: 1867
Model: T4W
Year: 1981
Price:
Contact us | CAT 3412 diesel deck engine, 1050 cfm / 350 psi air compressor , Worm gear head, Hammer Oilier , Water Injection, 50,000 lbs Pullback |
|
|
1997 Ingersoll-Rand T3W
Item No: 1876
Model: T3W
Year: 1997
Price:
Contact us | CAT 3406 Diesel Deck Engine (6364 hours) , IR 900 cfm / 350 psi Air Compressor , 18,000 lbs winch, Jib Boom, Water Injection, Hammer Oilier, Tools Included: , 800' ft of drill rods – (20' x 4 1/2") 1 - Stabilizer 1 – 10” roller bit 1 - 8” roller bit |
|
|
1999 Reichdrill 650 WII
Item No: 1895
Model: 650 WII
Year: 1999
Price:
Contact us | 7,200 Hours , CAT 3406 Diesel Deck Engine at 465 HP at 1800 RPM, Sullair 900 cfm / 350 psi Air Compressor , 7+1 drill pipe loader , 660' ft of used (4 1/2" x 20') Reichdrill style drill pipe, 25,000 lbs pulldown pressure with 30,000 lbs hoist, 57,200 lbs-in torque rotary head, 20 gpm water injection, Electric |
|
|
1979 Chicago Pneumatic 600WT
Item No: 1902
Model: 600WT
Year: 1979
Price:
Contact us | Detroit 6V92T Diesel Engine (Rebuilt in 2006), GHH 600 cfrm / 300 psi rotary screw two stage air compressor (Newly installed in 2007), Dynex 55 Gal/Min main hydraulic pump, (37 units) of used Drill Pipes (4 1/2” x 20’) included, Mounted on a Truck, FOB: Northern Region |
|
|
1993 Ingersoll-Rand T3W
Item No: 1911
Model: T3W
Year: 1993
Price:
Contact us | IR HR2 900 cfm / 350 psi Air Compressor (2003 model) , CAT 3406 Diesel Deck Engine , Bean 18 GPM Water Injection , 7 Rod Carousel , 300' ft of used Drill Pipe (20' X 4 1/2" X 2 3/8") included , Mounted on a 1994 International Truck, 350 Diesel Engine , FOB: Eastern Region, USA |
|
|
2001 Ingersoll-Rand T3W DH
Item No: 1912
Model: T3W DH
Year: 2001
Price:
Contact us |
IR T3W DH (Deephole Package)
High Torque motor head
IR 1070 cfm / 350 psi air compressor
CAT 3406 Diesel Deck Engine
7,000 Frame Hours
18,000 lbs winch
18 GPM Water Injection Pump
Rod Loader
Dual Jib Boom
600' ft of used drill pipe (3-1/2" X 20’) & |
|
|
1986 Simco 2800 HS HT
Item No: 1916
Model: 2800 HS HT
Year: 1986
Price:
Contact us | Description: Mission 3x4 pump, 7.3L Diesel Engine , Twin Hydrostats, Digital Ford tack and engine controls at rig, Split rod handling table, New hoses, New brakes on Truck, Mounted On: 2002 Ford 550 Truck 4X4 125,000 miles, |
|
|
1987 Driltech D25K
Item No: 1921
Model: D25K
Year: 1987
Price:
Contact us | Sulliar 840 cfm / 350 psi air compressor, CAT 3406 diesel deck engine (rebuilt in May ’07 still under warranty through CAT), Water Injection, 6 Rod Carousel and 12 Rod Rack, 35,000 lbs Pullback, 560’ ft of used drill pipe, and tools included, 8” used Rock Hog stabilizer hammer, 6” used Mincon hammer, 10” used drag bit, Mounted on |
|
|
1985 Ingersoll-Rand T4W DH
Item No: 1923
Model: T4W DH
Year: 1985
Price:
Contact us | DH (Deep Hole package) with 70,000 lbs Pullback , IR 900 cfm / 350 psi Air Compressor , Detroit 12V92 Diesel Deck Engine , Bean Water Injection Pump: 18 GPM, 1,500' ft of Drill Pipe (25' X 4 1/2") included, (2) used hammers included, Mounted on CCC Crain Carrier Company Truck, CAT 3208 Diesel Engine , FOB: S.E. |
|
|
2001 Ingersoll-Rand T4W DH
Item No: 1926
Model: T4W DH
Year: 2001
Price:
Contact us | S/N: 6582 , IR 1250 cfm / 350 psi air compressor (Rebuilt with 0 hours) , Cummins QSK 19C diesel deck engine (Rebuilt with 0 hours) , 4,000+ frame hours, P-7 Pumps, water injection pump, Drill tool inline lubricator , Electric Hammer |
|
|
1998 Driltech DK25
Item No: 1928
Model: DK25
Year: 1998
Price:
Contact us | CAT 3406E Diesel Deck Engine , Sullair 900 CFM / 350 PSI Air compressor , Hours on Machine - 6,800 , 6 Rod Carosel, Trough on side - 15-18 rod, Drillers helpers levers, Comes with extra drill rod, Break our tools, slips and bushings included, Mounted on a 1998 Ford Lot TM TruckCommercial class, Scale weight 50,620 lbs, Diesel |
|
|
1981 Ingersoll-Rand T4W
Item No: 1934
Model: T4W
Year: 1981
Price:
Contact us | IR 900 cfm / 350 psi air compressors , Detroit 12V71 Diesel Deck Engine (less than 1,000 hours since replaced) , 37,500 lbs Pullback, Dennison dual pump and slow feed Vicors pump, Mounted on a CCC (Crane Carrier Company) truck , Detroit 6L71 Diesel engine and 13 speed with Jake brakes , 21,000 miles, FOB: Western Region, USA |
|
|
1986 Driltech D40K
Item No: 1935
Model: D40K
Year: 1986
Price:
Contact us | Sullair 900 cfm / 350 psi air compressor (400 hours since rebuilt), CAT 3406 diesel deck engine (1,000 hours since rebuilt), Gardner Denver 5X6 Mud Pump (Piston Air) , 1,500' ft of Used Drill pipe (25' x 4 1/2") included, (2) IR 8" Hammers 380, (1) 6" IR Hammer 360, & (3) Stabilizers, |
|
|
2006 Atlas Copco T4W
Item No: 1937
Model: T4W
Year: 2006
Price:
Contact us | Cummins KTA 19 Diesel Deck Engine, High Pressure 1050 cfm / 350 psi Air Compressor , Spur Gear Rotary Head: 8,000 ft / lbs , Pulldown 30,000 lbs, Pullback 50,000 lbs, Torque 7,500 ft/lbs, 300' ft of Drill Pipe (25' X 4 1/2" x 3 1/2") included , Newer Paint, Mounted on a CCC (Crane Carrier Company) 6 x |
|
|
1981 Ingersoll-Rand T4W DH & (Long Tower)
Item No: 1945
Model: T4W DH & (Long Tower)
Year: 1981
Price:
Contact us | Serial Number: 14004, IR 1050 cfm / 350 air compressor, Detroit 12V71 T diesel deck engine , 2 motor Spur Gear Head (High Torque) , DH (Deep Hole) Package: 70,000 lbs Pullback , Long Tower handles (30' x 4 1/2") drill pipe and (Range II) casing pipe. , Mounted on a CCC (Crane Carrier Company) truck, CAT |
|
|
1995 Schramm T450W
Item No: 1948
Model: T450W
Year: 1995
Price:
Contact us | Detroit 8V92 Diesel Deck Engine , GHH 825 cfm / 350 psi Air Compressor, 320' ft of Used Drill Pipe (20' x 4 1/2") included, used Hammer 360 Shank style included, Mounted on a Ford Truck, Diesel Engine FOB: Eastern Region, USA |
|
|
1988 Schramm T450H
Item No: 1949
Model: T450H
Year: 1988
Price:
Contact us | Detroit 8V92 diesel deck engine, GHH 750 cfm @ 300 psi air compressor, 360' ft of drill pipe (20' x 4 1/2") included, used Hammer 360 shank style included, Mounted on a Ford Truck, Diesel Engine FOB: Eastern Region, USA |
|
|
1992 Ingersoll-Rand T4W
Item No: 1953
Model: T4W
Year: 1992
Price:
Contact us | IR 900 cfm / 350 psi Air Compressor (Rebuilt in 98'), Cummins KTA 19 Diesel Deck Engine (Reman in 4/09), Worm Gear Head, 50,000 lbs Pullback, Bean 10 GPM Water Injection Pump , 2 Rod Carousels , 300' ft of Drill Pipe (25' x 4 1/2"), (1) 6" IR Hammer & Bit, and basic tooling included , Mounted |
|
|
1979 Simco 5000 WS
Item No: 1958
Model: 5000 WS
Year: 1979
Price:
Contact us | New mud pump, New twin hydraulic pump transfer case, Mud pan 325' X 15' drill pipe, 9-liter diesel up front, 6-cylinder duetz on deck, 2-winches 4X4 International L 4700 truck, With 2000 lb winch mounted on the truck, Float tires in front (U-joint is out in the left front wheel), Optional:Optional Extra Cost: 1995 1200 gallon International |
|
|
1987 Schramm T660
Item No: 1961
Model: T660
Year: 1987
Price:
Contact us | Detroit 8V92T Diesel Deck Engine at 440 HP (780 since rebuilt), 850 cfm / 350 psi Air Compressor , Carousel with 7 rod x 20' x 4 1/2" Pipe and Hog Trough, Approximately 760' of used drill pipe included , High Torque 2 motor Top Head Drive, Pullback 36,000, Line Lubricator 5 gallon, Winch 12,000 lb, Water Injection Pump |
|
|
1991 Foremost Barber DR-24
Item No: 1968
Model: DR-24
Year: 1991
Price:
Contact us | • Drill Model # D12-26D-40-1150 (8,000 frame hours estimated) , • Mounted on a 4-axle 1992 White/Volvo truck with , Mercedes Diesel engine at 350 HP, estimated less than 50,000 miles• Sullair 1150 cfm / 350 psi Air Compressor• Cummins KTA 19C Diesel Deck Engine at 600 HP, • Casing capability- 24”.Casing |
|
|
1978 Schramm T64HB
Item No: 1971
Model: T64HB
Year: 1978
Price:
Contact us | 425 cfm / 250 psi Air Compressor, Detroit 8V71 Diesel Deck Engine, Mounted on a GMC Truck, Diesel Engine, FOB: Mifflinburg, Pennsylvania |
|
|
2007 Atlas Copco T4W DH
Item No: 1974
Model: T4W DH
Year: 2007
Price:
Contact us | DH (Deep Hole) Package 1250 cfm / 350 psi air compressor Cummins QSK19C diesel deck engine at 750 HP Bean 20 GPM |
|
|
1991 Ingersoll-Rand TH75
Item No: 1977
Model: TH75
Year: 1991
Price:
Contact us | Cummins KT19 Diesel Deck Engine at 525 hp, IR 900 cfm / 350 psi Air Compressor, 4x3 mission centrifugal pump, recently rebuilt swivel, new pull down cables, set up for 3 1/2" or 4 1/2" drill pipe, 3 1/2" IF drill pipe available at additional cost, 8,700 hours, newer paint, Mounted on a Paystar 5000 Truck10 speed transmission with |
|
|
1984 Ingersoll-Rand T4W
Item No: 1980
Model: T4W
Year: 1984
Price:
Contact us |
IR 900 CFM / 300 PSI air compressor (new radiator)
CAT 3406 diesel deck engine
S/N: 13060
Spur Gear Head
50,000 lbs of pullback
(2) Winches
300' ft of drill pipe (25' x 4 1/2") included
(2) Carousels for drill pipes
Water Injection
Hammer Oilier |
|
|
Schramm 425 cfm / 250 psi Air & Detroit 8V71 engin
Item No: 1985
Model: 425 cfm / 250 psi Air & Detroit 8V71 engine
Year: N/A
Price:
$13,500.00 | Set up for a Schramm T64HB drill rig to be mounted into the frame at an extra cost, 425 cfm / 250 psi Air Compressor (Rebuilt Super Charger) , Detroit 8V71 Diesel Engine (used with 8,000 hours) , FOB: Mifflinburg, Pennsylvania |
|
|
Failing 1500
Item No: 1988
Model: 1500
Year: N/A
Price:
Contact us | Failing 5 x 6 1/4" FM45 Mud Pump, 3L-6 Moyno Pump, Kelly Bar 17', 27' Tower, Hydraulic Pipe Holder & Breakout Wrench, 3rd Drum , Failing Breakout Table, Jacks Monkey Board, Mounted on 1987 Ford 800 Truck 4x46.6 Diesel Engine , Air BrakesWater Truck1,200 Gallon Capacity, CAT 3208 diesel engine , CAT 10 Speed Transmission, Mounted on 1980 GMC Truck 4X4 FOB: |
|
|
1975 Ingersoll-Rand T4W
Item No: 1993
Model: T4W
Year: 1975
Price:
Contact us |
IR 600 cfm / 250 psi air compressor
Detroit 8V92T diesel engine
2 carousels
Mounted on a CCC (Crane Carrier Company) Truck
Detroit 671 diesel engine
FOB: Mifflinburg, Pennsylvania
|
|
|
1991 Ingersoll-Rand T3W
Item No: 1994
Model: T3W
Year: 1991
Price:
Contact us | Cummins N14 diesel deck engine (Rebuilt in 2006 with 3800 hours since) , IR 825 cfm / 350 psi air compressor , Hammer Oilier , Bean 10 GPM Water Injection Pump , Long Tower, 18,000 lbs main winch and 2,500 Sand Line , 32,500 Pullback , 4 hydraulic jacks, Mounted on a 1990 International Paystar 5000 Truck, diesel engine |
|
|
1985 Schramm T450
Item No: 2007
Model: T450
Year: 1985
Price:
Contact us | GHH 750 cfm / 300 psi air compressor (5,979 hours), Detroit Diesel Deck Engine (rebuilt May of 2007 with hours 2,300 since) , One man operation with tooling, 200' ft of Drill Pipe (4 1/2 x 20' API x 3 1/2" Reg pin) included, Mounted on 1985 Mack Truck , 300 HP Mack Diesel Engine |
|
|
1984 Ingersoll-Rand RD10
Item No: 2011
Model: RD10
Year: 1984
Price:
Contact us |
IR 1050 cfm / 350 psi twin screw air compressor
2005 model Cummins KTA 19 Diesel Deck engine at (600 HP) with 8,000 hours
Pullback 70,000 lbs
Tower 44' ft (can run range II casing)
2 Motor Spur Gear (High Torque) Power Head (7200 ft. lbs) & (0 to |
|
|
1973 Schramm T64HB
Item No: 2012
Model: T64HB
Year: 1973
Price:
Contact us | Detroit 8V71 Diesel Deck Engine , 425 cfm / 250 psi piston Air Compressor (needs to be rebuilt), Mounted on 1978 Chevrolet truck, FOB: N.W. Region, USA |
|
|
1978 Schramm T64HB
Item No: 2013
Model: T64HB
Year: 1978
Price:
Contact us | S/N: 366 425 cfm / 250 psi air compressor Detroit 8V71 diesel deck engine 600' ft of (20' X 4 1/2" X 3 1/2") & Bits included Water Injection Tooling included Mounted on a 1984 International truck - VIN#: 1HTCF2555DHA32967 diesel engine FOB: Burkina Faso, West Africa |
|
|
1975 Ingersoll-Rand TH55 Cyclone
Item No: 2014
Model: TH55 Cyclone
Year: 1975
Price:
Contact us | Detroit 671 Diesel Deck Engine , 600 cfm / 140 air compressor (Vain) , Meyers Water Injection , Venture Hammer Oilier , 300' ft of used drill pipe (15' x 4 1/2 x 2 7/8") included , Mounted on a Truck, Detroit 6V53 Diesel EngineFOB: N.W. Region, USA |
|
|
2003 Ingersoll-Rand T3W
Item No: 2016
Model: T3W
Year: 2003
Price:
Contact us | CAT 3406E diesel deck engine (New Bearings) at 565 HP IR HR2.5 - 1070 CFM / 350 PSI air compressor (Completely Rebuilt) Serial Number: 6732 32,500 lbs Pullback Bean 25 GPM Water Injection Pump Hammer Lubricator 18,000 lbs winch 4 hydraulic jacks, Pipe Rack, (2) Drillers Stands in back |
|
|
1997 Ingersoll-Rand T4W
Item No: 2020
Model: T4W
Year: 1997
Price:
Contact us |
Cummins QSK 19 diesel deck engine (new heads)
IR 900 cfm / 350 psi air compressor
50,000 lbs of pullback
Bean 25 GPM water injection pump
Newer style electric hammer oilier (3 settings)
Worm Gear Power Head (new gear & motor)
(2) Carousels - 4 & 7 |
|
|
1986 Speedstar 275 Quickdrill
Item No: 2021
Model: 275 Quickdrill
Year: 1986
Price:
Contact us | Mounted on 1986 International Truck 4x4 DT 466 Diesel Engine (PTO Transfer) 4 Hydraulic leveling jacks Rod Spinner One arm loader 3 x 4 Halco mud pump 275 cfm / 125 psi Air Compressor 260' ft of flush joint drill pipe (10' x 3 1/2") New transmission |
|
|
1978 Schramm T685 DHH
Item No: 2024
Model: T685 DHH
Year: 1978
Price:
Contact us | GHH 850 cfm / 250 psi air compressor, Detroit 12V71 TT (Twin Turbo) diesel deck engine, 80,000 lbs Pullback with DH (Deep Hole) Package, 20 GPM hydraulic water injection pump, 2 Winches and Jib Boom, 3 Leveling Jacks, Note: Set up & Plumbed for RC (Reverse Circulation) Drilling, Mounted on a 1982 CCC (Crane Carrier Company) Truck |
|
|
1994 Ingersoll-Rand T4W
Item No: 2025
Model: T4W
Year: 1994
Price:
Contact us | IR HR2 900 cfm / 350 psi air compressor, Cummins KTA19C diesel deck engine , 50,000 lbs Pullback , 2 motor Spur Gear Head, 18.5 GPM Bean F0413 water injection pump , Hammer Oilier, 3 winches, 2 Jib Booms, Note: Set up & Plumbed for RC (Reverse Circulation) Drilling with Swivel & , Cyclone , Mounted on a CCC (Crane |
|
|
1980 Ingersoll-Rand RO 300
Item No: 2026
Model: RO 300
Year: 1980
Price:
Contact us | (2) Gardner Denver 4 1/2" x 3 1/2" FXG 172 Mud Pumps (hydraulically driven and can be run separately or together), Myers 2 cylinder pump , Main 2 Pant Winch & Ramsey Hydraulic Sandline, Retractable Rotary Table , 3 Round Key Fluted Kelly Bar (22') is Retractable , 24" Deck Slide on Rotary , 4 Leveling Jacks |
|
|
1986 Schramm T660
Item No: 2039
Model: T660
Year: 1986
Price:
Contact us | 700 cfm / 350 psi Air Compressor , Detroit 8V71T Diesel Deck Engine , 40,000 lbs of Pullback , Mounted on a GMC Brigadier Truck , CAT 3208 Diesel Engine , Mileage: 44,335, 500' ft of Drill Pipe (20' x 4 1/2") included, Other Misc. Tools, FOB: Eastern Region, USA |
|
|
1987 Reichdrill T600W
Item No: 2080
Model: T600W
Year: 1987
Price:
Contact us | GHH 750 cfm / 300 psi Air Compressor , CAT 3406 Diesel Deck engine, Bean 10 GPM Water Injection Pump, Hammer Oilier , 3 Leveling Jacks , Drill Pipe Rack and Carousel , Mounted on 1987 IHC S1900 T/A Truck, DT466 diesel engine, 385/65R 22.5 front tires, 11R22.5 rear tires, FOB: Mifflinburg,Pennsylvania |
|
|
1986 Ingersoll-Rand TH60
Item No: 2081
Model: TH60
Year: 1986
Price:
Contact us | S/N: 2549, IR 600 cfm / 250 psi Air Compressor , Harrisburg Centrifugal 3x4 Mud Pump , Bean 25 GPM Water Injection Pump , Hammer Oilier , 4 Leveling Jacks, Drill Pipe (20' x 3 1/2" OD) Rack , Mounted on a 1986 GMC General T/A Truck, Detroit 475 HP Diesel Engine (PTO - powers drill rig and |
|
|
1988 Schramm T660H Rotadrill
Item No: 2083
Model: T660H Rotadrill
Year: 1988
Price:
Contact us | S/N J112-1659 and 6,277 Hours on Gauge , 900 cfm / 350 psi Air Compressor , Detroit 8V92TA Diesel Deck Engine , Drill Pipe Rack , Meyers Water Injection Pump, Hammer Oilier , 3 Leveling Jacks, Mounted on a 1988 GMC White Brigadier T/A Truck - VIN # 4GDT8C4YOJV70019, CAT 3208 Diesel Engine , 13 Speed Transmission , 385/65R 22.5 front |
Copyright © 2010 East West Machinery Exporting, Inc.. All Rights Reserved.
|
