|
|
1985 Schramm T685 DHH - Long Tower Range III
Item No: 50
Model: T685 DHH - Long Tower Range III
Year: 1985
Price:
Contact us |
Sullair 900 cfm / 350 psi air compressor
Detroit 12V71 TT (Twin Turbo) diesel deck engine at 830 HP
Hydraulically raised mast & 4 leveling jacks
120,000 - 130,000 lbs Pullback (estimated)
Long Tower (50' stroke head)
Runs Range III Casing and uses 30' or 40' ft drill pipe |
|
|
2003 Ingersoll-Rand RD20 (Range III)
Item No: 73
Model: RD20 (Range III)
Year: 2003
Price:
Contact us | CAT 3412 Diesel Deck Engine S/N - BDT01422, IR HR2.5 Series 1150 cfm / 350 psi Air Compressor (Compressor has had top side redone).S/N - 0491RU06DG, Seven rod Carousel , 60 GPM Hammer Oil Injection Lubricator , 25 GPM CAT water injection pump , 7,500 estimated frame hours, Tattle tale indicator , Storage box under cooler , Diesel |
|
|
2008 Atlas Copco RD20 (Range III)
Item No: 187
Model: RD20 (Range III)
Year: 2008
Price:
Contact us | FOB: Mifflinburg, Pennsylvania USA , Less Than 300 Frame Hours 2008 Atlas Copco R20 - Range III - Serial Number: 21299 Ready For Drilling with limited warranties on major components included! CARRIER Mounted on a Custom Tridem chassis built to Atlas Copco (5 axles) - VIN#: 1CYDGV5808T048289 |
|
|
Challenger 360-200
Item No: 189
Model: 360-200
Year: N/A
Price:
Contact us | Double Stacked Drums, Hoisting Drum, 10.5 inches by 22.5 inches, Kelly Drum, 10.5 inches by 22.5 inches, Clutches, Wichita 24 inch, 3 Plate, Single Line Pull 36,000 pounds, LeBus Grooving with 7/8 inch line (1 inch swaged line), PARMAC Hydromatic Twin Disc Water Brake, Hydraulic Wireline Drum, 8 foot Elevated Drill Floor with Howard Turner 18 inch |
|
|
1984 Failing 2500-T
Item No: 190
Model: 2500-T
Year: 1984
Price:
Contact us | Mounted on a CCC (Crane Carrier Company) truck, Detroit 6V71 Diesel Engine , Double-twin axles, 4 Leveling Jacks, Gardner Denver 7 1/2" x 10" mud pump, 18" rotary table, Double Drums, 6 Part Lines , Sand Line, Retractable Head, 100,000 of Pullback , Stand Pipe for Standard RC (Reverse Circulation) , Kelly Bar and 6RC Swivel included , Open manufactures specs for more |
|
|
Howard Turner 2500
Item No: 191
Model: 2500
Year: N/A
Price:
Contact us | Flange Drill Rig (DR-1) , Detroit 471 Diesel engine, Trailer mounted, two axle (2 1/2 Ton Truck in back) , 18" rotary table, Double drum drawwork , Clutches, Drive Line, FOB: SW Region, USA |
|
|
1994 Ingersoll-Rand RD20 (Range II)
Item No: 1100
Model: RD20 (Range II)
Year: 1994
Price:
Contact us | IR HR2 1050 cfm / 350 psi air comrpessor (rebuilt) , Cummins KTA 19C Diesel Deck Engine (rebuilt) , 25 GPM CAT water injection pump, 2 Motor Spur Gear Head (rebuilt) , Pullback 110,000 lbs, 8 Rod Carousel , 3500' of used drill pipe (30' X 4 1/2") & Misc Tooling included, Mounted on a Central Manufacturing |
|
|
1978 Chicago Pneumatic RT 1800
Item No: 1136
Model: RT 1800
Year: 1978
Price:
Contact us | 57’ ft Mast (Board for Standing Doubles and Can Run Range III Casing), NTC 400 Cummins diesel engine (powers rig and truck) , GHH 800 cfm / 300 psi Air Compressor, Retractable 10 1/2" Table , Mounted on a CCC (Crane Carrier Company) Truck, , Also included with drill rig purchase: Note - drill rig, |
|
|
1978 Chicago Pneumatic RT 1800
Item No: 1380
Model: RT 1800
Year: 1978
Price:
Contact us | GHH 825 cfm / 300 psi air compressor, Gardner Denver FXX 5 ½” x 8” Mud Pump, Cummins NTC 400 diesel engine, Retractable 10 ½” table, 52’ ft Mast, Mounted on a CCC (Crane Carrier Company) truck, Jake Brakes, FOB: S.W. Region, USA |
|
|
1981 Ingersoll-Rand T4W DH & (Long Tower)
Item No: 1410
Model: T4W DH & (Long Tower)
Year: 1981
Price:
Contact us | Serial Number: 14004, IR 1050 cfm / 350 air compressor, Detroit 12V71 T diesel deck engine , 2 motor Spur Gear Head (High Torque) , DH (Deep Hole) Package: 70,000 lbs Pullback , Long Tower handles (30' x 4 1/2") drill pipe and (Range II) casing pipe. , Mounted on a CCC (Crane Carrier Company) truck, CAT |
|
|
1979 Chicago Pneumatic RT 1800
Item No: 1774
Model: RT 1800
Year: 1979
Price:
Contact us | GHH 825 cfm / 300 psi air compressor (screw type) , Gardner Denver FXX 5” x 8 1/2” Mud Pump (4 piston), Cummins NTC 400 diesel engine, Retractable 10 ½” table (4 speed transmission) , 52’ ft Mast (was extended), 3 winch lines (casing and sand), (25' x 3 1/2" API) Reg Fluted Kelly , 60,000 lbs |
|
|
Work over drill rigs
Item No: 1875
Model: Work over drill rigs
Year: N/A
Price:
Contact us | Tubing drum with 32" diameter flanges, 10-.3/4" diameter x 37" long drum core equipped |
|
|
1991 Ingersoll-Rand RD20 (Range II)
Item No: 1924
Model: RD20 (Range II)
Year: 1991
Price:
Contact us | IR 1050 cfm / 350 psi Air Compressor, Cummins KTA 19C Diesel Deck Engine , 2 motor Spur Gear Head, 110,000 lbs Pullback, Mounted on a CCC (Crane Carrier Company) Truck with 4 axles, Cummins L10 Diesel engine , Included as a Package: , 5,000' ft of Drill Pipe (30' X 4 1/2") , Raised Drilling Platform, (2) Steel Trailers, Dog |
|
|
2002 Ingersoll-Rand RD20 Range III
Item No: 1972
Model: RD20 Range III
Year: 2002
Price:
Contact us | IR 1250 cfm / 350 psi Air Compressor, Cummins QSK-19 Diesel Deck Engine, CAT 25 GPM Water Injection Pump , 2 motor Spur Gear Head , |
|
|
2000 Ingersoll-Rand RD20 Range II
Item No: 1973
Model: RD20 Range II
Year: 2000
Price:
Contact us | Cummins QSK-19C diesel engine at 600 HP (1,500 low hours) , IR HR2.5 - 1250 CFM / 350 PSI air compressor (1,500 low hours), Rig equipped with flash fire suppressant system, Tower: 46’6” and is hydraulically raised and scoped, Single rod drill pipe that holds either 25’ ft or 30’ ft drill pipe , Pullback |
|
|
1980 Cabot 750
Item No: 2030
Model: 750
Year: 1980
Price:
Contact us | |
|
|
2000 Ingersoll-Rand RD20 II
Item No: 2034
Model: RD20 II
Year: 2000
Price:
Contact us | RD20 - Range II, S/N - 6526 with 6,710 Hours on gauge , S/D Draw Works, 110,000 lbs Hoisting Capacity Pullback, CAT 3406C Diesel Deck Engine at 360 HP and Electric Start (Optional to install at an extra cost a Brand New Cummins QSK-19C diesel deck engine at 755 HP / 522KW and 1800 |
Copyright © 2010 East West Machinery Exporting, Inc.. All Rights Reserved.
|
