|
|
1974 Mobile B50
Item No: 152
Model: B50
Year: 1974
Price:
Contact us | Simco head, Mounted on International Loadstar truck, 4cyd Ford diesel, Spool valves leak 3L6 Monyo pump, CAT head, Main Winch, Wire winch, Gas deck engine, FOB: PA B-50 |
|
|
Mobile B61
Item No: 526
Model: B61
Year: N/A
Price:
Contact us | Diesel Deck Engine, Monyo Pump, Rod Clamp, Mounted on a 1975 Ford F8000 truck, Diesel Engine , FOB: N.E. Region, USA |
|
|
1988 Mobile B 53
Item No: 902
Model: B 53
Year: 1988
Price:
Contact us | CAT Head, Slide Base, Mast is 21 ft., Monyo Pump, 250 gallon water tank, 4 cylinder Hercules gas deck engine , 1 winch (6,000 lbs) , Note: Set up for AWJ drill rods for Augering and Wash Boards , 2 rod racks on the side , Hydraulic Chuck , 3 |
|
|
1971 Mobile B40
Item No: 903
Model: B40
Year: 1971
Price:
Contact us | 6 cylinder 1985 Ford gas deck engine 300 HP , 1 winch (3,000 lbs), CAT Head , 2 side rods racks, Mounted on a 1989 Ford F700 truck, Ford 6 cylinder diesel (220,000 miles) , 250 Gallon Water Tank, 2 Jacks, Slide Base, 21 'ft Mast, Note: Set up for Soil Samples Bores, Washboards, and Auger Drilling |
|
|
1990 Mobile B-57
Item No: 1194
Model: B-57
Year: 1990
Price:
Contact us | Hours: 7,840, Engine: 3.9 Cummins (4bt, 100 hp, 3.9 liter), 2L4 Moyno pump, 4 speed transmission with Hi-Lo Torque, Main hoist line, Auxiliary hoist line, Safety driver hoist line, No CAT head, Separate diesel tank, Extra right angle gear box in disrepair, Mounted on a 1990 Ford F800 Truck GVWR: 30,000 lbs, Miles: 183,287, Engine: New Holland, (6 cylinder, 210 hp, |
|
|
1987 Mobile B-57
Item No: 1769
Model: B-57
Year: 1987
Price:
Contact us | Pony Motor: Ford 6-Cylinder engine , Water Tank: 400-Gallon, Mud Pump: Moyno 3L8, Tail Slide Base: Swivel, CAT Head: Hammer Equiped, Winch: Pullmaster H-8 8,500 lbs, Rod Chuck: Included, Breakout Wrench: Included, Auger Racks: Under Deck, Tool Boxes: Under Deck & On Deck, Mounted on Carrier: 2001 International Paystar 4700 Truck, FOB: S.E. Region, USA |
|
|
1982 Mobile B-57
Item No: 1865
Model: B-57
Year: 1982
Price:
Contact us | Mounted on 1980 International S-1724 Truck with 75,000 miles , 345 Gas Engine & 4 Speed Transmission (Rebuilt in 4/2007) , New radiator installed 12/2003, New 2-speed shifter replaced, starter , carburetor replaced in 04/2009, Tires in good condition (New in 04/2005) less than 20,000 miles on tires, Industrial Ford Deck Engine at 300 HP |
|
|
1990 Mobile B61 HDX
Item No: 1897
Model: B61 HDX
Year: 1990
Price:
Contact us | CUMMINS 4BT 3.9 DIESEL ENGINE AT 100 HP AT 2500 RPM, 3L8 PUMP, 8,500 LBS MAIN HOIST, 29' FT TOWER, MOUNTED ON FORD F800 TRUCK, 5 SPEED TRANSMISSION FORD 7.8 DIESEL ENGINE AT 210 HPFOB: N.E. REGION, USA |
|
|
Mobile B53
Item No: 1901
Model: B53
Year: N/A
Price:
Contact us | Mounted on a Wilco built swamp carrier equipment crawler (big tracks for soft mud and sand formations), This unit is completely new except for the platoons, mask and three winches., New engines, new pressure compensated hydraulic pumps, new hoses, new 140/300 auto hammer, new hydraulic valves, new Fraste double breakout clamps, new |
|
|
1981 Simco 4000 TR
Item No: 1917
Model: 4000 TR
Year: 1981
Price:
Contact us | 200' ft of Mayhew Jr. Rods included, Powered by a Deutz Diesel Engine, Equipped with coring head, New hoses, Rebuilt hydraulic pump, New motors on the track drive, Redone under carriage bearings and bushings , New replacement pieces for track, Full-length, between frame, hydraulic tank (located under engine), Engine leveler, No mud or air, FOB: N.E. Region |
|
|
1984 Mobile B30 S
Item No: 1932
Model: B30 S
Year: 1984
Price:
Contact us |
S/N 621700
Isuzu B305 Diesel Deck Engine
Includes;
(9) of Drill Pipe (10' ft) included
1 Drill Bit
Soil Sampler
3 hydraulic jacks
Mounted on Ford F700 Truck
VIN:# 1FDNK64N2EVA19339
Detroit 8.2 Diesel Engine
FOB. Mifflinburg, Pennsylvania
|
|
|
1994 Ingersoll-Rand A 200
Item No: 1959
Model: A 200
Year: 1994
Price:
Contact us | Stroke 10' foot, PTO or Deck Engine options, Drilling ToolsTable Bushings, Wrenches, Rob Lifter, Note: drill can be mounted on a single axle truck for an extra cost (currently not mounted)FOB: Mifflinburg, Pennsylvania |
|
|
1987 Mobile B61HD
Item No: 1989
Model: B61HD
Year: 1987
Price:
Contact us | 3.9 Cummins (4bt, 100 hp, 3.9 liter) diesel deck engine , 8,500 LBS MAIN HOIST, 29' FT TOWER, rod chuck , Main hoist line, Auxiliary hoist line, Auger racks, Mounted on Ford F800 TruckDiesel Engine , FOB Eastern USA |
|
|
1975 CME Drill 75
Item No: 2027
Model: 75
Year: 1975
Price:
Contact us | Detroit 471 diesel deck engine , Moyno 4L3 pump, Water Tank on deck , Hydraulic Main Winch, 1 winch in tower and 1 safety winch free fall, Auto Hammer, Jib Boom, 2 Auger Pipe Racks, Kelly Bar, Slide Base , Mounted on a 1989 International 4800 Truck 4x4, FOB: S.W. Region, USA |
|
|
1992 CME Drill 75
Item No: 2028
Model: 75
Year: 1992
Price:
Contact us | Cummins BT-6 diesel deck engine , Moyno (8L4) pump, Water Tank on Deck , Angle Package, Slide Base and Wiggle Tail , Hydraulic Main Winch, 2 Winches in Tower, 1 Free Fall Safety Hammer Winch , 2 Auger Pipe Racks, CME Auto Hammer , Auto Breakout Wrench , Night Lights, Mounted on a 1992 Ford F800 Truck, Ford Iveco diesel engine , 3 Leveling |
|
|
1989 CME Drill CME 95
Item No: 2084
Model: CME 95
Year: 1989
Price:
Contact us | CAT 3208T diesel deck engine at 250 HP, Moyno (8L4) pump (Hydraulic with Transmission), Water Tank on Deck , Slide Base and Wiggle Tail , Hydraulic Main Winch, 5 Winches (2 Main Winches, 1 Wireline, and 2 Sandline Winches), 1 Free Fall Safety Hammer Winch , 2 Auger Pipe Racks, CME Auto Hammer , Auto Breakout Wrench , Night Lights, Mounted |
|
|
Mobile B80
Item No: 2085
Model: B80
Year: N/A
Price:
Contact us | Mobile B-80 , Cummins 4BT diesel deck engine, Moyno (8L4) pump (Cable Pull Hydraulic), Water Tank on Deck, Slide Base, Hydraulic Main Winch, 2 Winches (1 Main Pullmaster, 1 Sandline), 1 Free Fall Safety Hammer Winch, 2 Auger Pipe Racks, CME Auto Hammer, Air Swivel, API PIN Adapter, and Tool Boxes, Night Lights, Mounted on a Ford F800 Truck - 2 Axles |
Copyright © 2010 East West Machinery Exporting, Inc.. All Rights Reserved.
|
