|
|
1995 Ingersoll-Rand T4 BH
Item No: 22
Model: T4 BH
Year: 1995
Price:
Contact us | 8,000 Hours, Cummings KT19 Diesel Deck Engine, IR 900 cfm / 350 PSI. Air Compressor (Double Coolers), 2 Motor Spur Gear Head (High Torch), Operators Cab with A/C, 55 Gallon Oil Injection, Water System, Night Lights, Auto Break Out Wrench, Mounted on a CCC (Crane Carrier Company) Truck, Cummins L10 Diesel Engine, 50,000 miles, FOB: Eastern Region, USA |
|
|
1988 Ingersoll-Rand DM45
Item No: 59
Model: DM45
Year: 1988
Price:
Contact us | IR 1050 cfm / 350 psi Air Compressor (1992 model) Cummins KTA 19C Engine (Needs to be replaced) 5 rod carousel 3 leveling jacks Spur |
|
|
2005 Atlas Copco CM780D
Item No: 84
Model: CM780D
Year: 2005
Price:
Contact us | Atlas Copco CM780D Track Drill, 865 cfm / 350 psi Air Compressor , CAT C13 Diesel Engine (rebuilt 7/2007 with 1,916 hours since) at 445 HP, 4,574 frame hours on gauge , New style Rotary Head (since 8/2007 with 2,102 hours since) , Angle Drilling Package & Angle Meter (45 degree Angle with Left & |
|
|
Ingersoll-Rand CMM - Mining Crawler Drill Rig
Item No: 85
Model: CMM - Mining Crawler Drill Rig
Year: N/A
Price:
Contact us | Ingersoll-Rand CMM drill: Mining Crawler Drill Rig and Power Unit for Support , , Deutz Diesel engine 3 cylinder (converted to move the drill and set up), It has a 2 motor rotary head designed for rotary drilling and down the hole hammer (5" - 6 1/2" inch diameter range) with floating spindle, |
|
|
1988 Reichdrill C-450
Item No: 91
Model: C-450
Year: 1988
Price:
Contact us | Sliding Angle Mast, 1000 cfm / 350 psi Air CompressorNew End Bearings, NTC 855 Cummins Diesel EngineComplete Rebuild 1500+ Hours Ago, 6,250 hours, Under Carriage 75%, Dust collector, 25 GPM water injection pump, DTH hammer lubricator, 4 hydraulic leveling jacks, Carousel set up for 4-1/2" OD x 20' length drill pipe, Hydraulic system gone through, New pumps and motors, New cooler and |
|
|
1995 Ingersoll-Rand CM-695D
Item No: 1236
Model: CM-695D
Year: 1995
Price:
Contact us | Caterpillar 3306 Diesel Engine, 9,100 Total Frame Hours, 6,700 Drilling Hours, Full Parts and Tools to use the machine for (4" - 4.125") and (5.5" - 6") Holes, Was used for blasthole drilling at depths of 50' ft - 60' ft, FOB: Eastern Region, USA |
|
|
Custom Built - Mining Crawler Drill Rig
Item No: 1237
Model: Custom Built - Mining Crawler Drill Rig
Year: N/A
Price:
Contact us | Custom Built Drill Rig for Mining - per customers specifications , Mounted on HD , 140 HP Cummins Turbo , 4 Kawasaki Pumps, Proportional Valves, Remote Componsators, 200 Gallon Hydraulic Resvoir, 80 Gallon Fuel Tank, 125/250 Two Speed Raineer Drill Head, Two Cylinder Bean Injection Pump, Moyno Water Pump, Hydraulic Cooler, 15% (Angle Up) and 8% (Angle Down) Mast Movement , Note: The |
|
|
2000 Ingersoll-Rand DML
Item No: 1927
Model: DML
Year: 2000
Price:
Contact us | Crawler Blast Hole Drill Rig , S/N: 7573 , Cummins N-14 diesel engine , IR 1250 cfm / 150 psi (low pressure) , FOB: Mifflinburg, Pennsylvania |
|
|
1997 Reedrill I50 - Infinity Series
Item No: 1930
Model: I50 - Infinity Series
Year: 1997
Price:
Contact us | Hour meter 8,058, Sullair 1300 CFM/150 PSI air compressor (Rebuilt), CAT 3408 diesel deck engine (Rebuilt), Repacked Jack Cylinders & Mast Cylinders, Air Conditioning, New Lubrication System, Many new Hoses, Pumps, and Motors., New Turbo, Muffler, winch and cable. , FOB: NE Region, USA |
|
|
1985 Ingersoll-Rand DM45
Item No: 1952
Model: DM45
Year: 1985
Price:
Contact us | Multi-Pass, IR 750 cfm / 350 psi air compressor, Cummins Diesel engine , Rebuilt cylinders on mast , Rebuilt three (3) leveling jacks , five (5) rod carousel, FOB: Eastern Region, USA |
|
|
1988 Ingersoll-Rand T4 BH
Item No: 1962
Model: T4 BH
Year: 1988
Price:
Contact us | IR 900 cfm 350 psi Air Compressor , Cummins KT-19 Diesel Engine (Rebuilt), Hours 6,216 , Pullback 37,500 lbs, Spur Gear power head with single motor, Carousel 5 rod, Handles - Drill pipe (4" x 25' x 5 1/2") , Hammer Oilier, Mounted on a Hendrickson Carrier Truck , Diesel Engine Miles 6,300FOB Mifflinburg, PA |
|
|
2004 Atlas Copco ROC F9
Item No: 2038
Model: ROC F9
Year: 2004
Price:
Contact us | Serial number AVO04A663-8992002880, Powered by Caterpillar diesel engine, Atlas Copco 450 cfm / 125 psi air compressor, COP2550 /2550EX Hammer, Auto Lube, Only 3,079 hours!, Misc. spare parts (filters etc.) included, FOB: N.E. Region, USA |
Copyright © 2010 East West Machinery Exporting, Inc.. All Rights Reserved.
|
