2006 Schramm T130 XD Drill Rig

Item No
3054
Condition
Used
Manufacturer
Schramm
Status
Sold
Model Year
2006
Model No
T130 XD Drill Rig
Quantity
0
Price
Sold
Description

  • 2006 Schramm Model T130XD / Reconditioned and Ready to Drill
  • Unit Engine ? MTU 12V?2000TA DDEC, 760 bhp (567 kw) @ 1,800 rpm
  • Hydraulic System ? Eight hydraulic pumps, three fixed displacement type and five variable
  • volume piston type, provide hydraulic power for all rig functions. All hydraulic circuits are fully
  • filtered, protected by relief valves and include an oil cooler. Shutoff valves are provided at each
  • tank suction outlet for ease of service.
  • Tophead 2 Motor High Capacity (4") Tilt:
  • A heavy duty single reduction (3.5:1) top head design for high torque and large diameter drilling
  • applications. Unit is fitted with two hydraulic motors. Motor displacement and performance
  • must be specified. The top head hydraulically tilts to aid pipe and casing handling. Tophead
  • swivel includes a 3" diameter access port to allow sampling equipment to be run through the
  • rotation unit. Includes hydraulic lock pins to retain top head in the drilling position.
  • Special pins are mounted to the top head trunnion mounting bars which allow the use of
  • elevator links for lifting heavy strings of casing with the hoist system.
  • Spindle Thru Hole: 4.125" ID (105 mm)
  • Output Thread: 5?1/2 API Internal Flush Box
  • Swivel: King Capsule Type, 3,000 psi, 3" ID
  • Maximum Pressure: 3,000 psi
  • Tilt Capacity: 32,000 Ft Lb torque. Up to 4,000 lb tubular
  • Dual Rotation Motors, low speed, high torque, hydraulic motors. 0?102 rpm @ 150,790 in?lb
  • (17,036 N?m).
  • Rotation Torque Limiter ? Control panel mounted valve to regulate hydraulic pressure to the
  • rotation motors.
  • Mast Tilt ? The two mast tilt cylinders are cushioned.
  • 2006 Schramm Model T130XD
  • Reconditioned and Ready to Drill
  • Cooling System ? Three core, side by side package, 130°F (54.4°C) ambient rating, with 60"
  • hydraulically driven fan.
  • Control Panel ? Located on the left hand side, the swing out style control panel stores under the
  • mast for transport and includes full instrumentation and fold?up operator's and helper's
  • platforms. A valve section is included for operation of a customer supplied BOP.
  • Tool Box ? A lockable tool box is located on the right hand side of the rig. Capacity ? 9 cu ft (.25
  • cu m).
  • Electrical System ? 24V DC, 140 amp alternator, two 12V batteries, mast and work lights, circuit
  • breakers.
  • 1,500 psi Fluid Line Plumbing: Airline plumbing rated to 1,500 psi (103 bar). Includes 3" ID (76.2
  • mm) plumbing.
  • Telemast, 50' Travel (With a floating sub installed, is 50’ clearence between the end of the sub
  • and the top of the table) Telescoping construction permits long head travel and working height,
  • yet short overall length in the transport position. Equipped with a 32"
  • (813 mm) cylinder operated slide, the mast is free?standing, all pullback loads are directed into
  • the ground, not the rig frame. Hydraulically operated mast feet offer adjustability to work over
  • top of diverters or protection equipment. Mast feet offer 41" (1.04 m) of stroke and are
  • equipped with mechanical locking devices. Mast base height is adjustable to 54" with wheels
  • on the ground. Outriggers can increase clearance by an additional 41" offering up to 95" of
  • possible working room below the table.
  • Feed System ? The top head is raised and lowered by hydraulic traverse cylinders through special
  • wire rope and large diameter Nylatron sheaves.
  • As the tophead is raised, the inner mast section extends by a ratio of 1:2 until it reaches its fully
  • extended position at 50’ of clear head travel.
  • Top Head Travel: 50’ (15.24 m)
  • Hoist Capacity: 130,000 lbs. Actual (59,090 kg)
  • Pulldown Capacity: 32,000 lb (14,545 kg)
  • Working Diameter At Mast Base: 40" above table (w/loader) 48" diameter below the table
  • Working Height Below Table: Adjustable to 54" with wheels on the ground. Outriggers can
  • increase clearance by an additional 41".
  • Mini Lube System
  • Multi point system to simplify lubrication of drill components. Provides centralized grease
  • fitting locations for top head, crown, jib boom and pipe loader.
  • RotationLock for DH Mtr, Std
  • Locking mechanism to prevent top head gearbox from rotating during downhole directional
  • drilling operations. Reduces spindle to table clearance by 4". Total spindle to table clearnace is
  • 48' 6". For 3" ID
  • Tophead Brake torque resistance: 6,666 ft/lbs
  • Slow Feed Drill?Up Valve Permits regulated pressure control of slow feed circuit when hoisting.
  • Sold Without Compressor
  • 2006 Schramm Model T130XD
  • Reconditioned and Ready to Drill
  • Crane Carrier, 10x4 plus pusher axle, 117,500 lb (53,298 kg) GVWR, Cat C?13, 410 hp @ 2,100
  • rpm, Jacobs engine brake, Fuller RTO?14908LL, 10 speed transmission, front towing eye. Single
  • front outrigger is mounted on carrier frame. Two rear outriggers are integral members of the
  • drill rig frame.
  • Jib Boom, Hydr Swing & Extend 140° swing and 40" (1,016 mm) retract and extend, permits the
  • winch line to be centered over the borehole.
  • The standard hydraulic jib boom provides the ability to handle drill pipe while working around
  • the single pipe loading arm.
  • Auxiliary Winch Controls ? Hydraulic valves are mounted on the right rear side of the rig to allow
  • the helper to operate the loading arm, jib boom and the winch. Winch has two speed control
  • valve for added operator control. Includes RH helper's platform.
  • Winch, 9,600 lb (150' x 1/2")
  • 9,600 lb (4,354 kg) @ 151 fpm (46 mpm) bare drum, 150 ft (46 m) of 1/2"
  • (12.7 mm) Dyform 18 high strength low rotation cable.
  • Drill rig painted Schramm Red.
  • Mast assembly painted Schramm Ultra White.
  • FOB: Eastern Region, USA


Back Print