2004 Schramm T450WS Drill Rig & 1992 Chevy Water Truck - SOLD

Item No
3346
Condition
Used
Manufacturer
Schramm
Status
Sold
Model Year
2004
Model No
T450WS Drill Rig
Quantity
1
Price
Sold
Description

  • 2004 Schramm T450WS Rotadrill Rig & 1992 Chevy Water Truck
  • Low 6,962 hours
  • Sullair 900 cfm / 350 psi With Clutch
  • CAT 3406 Diesel Engine
  • Mounted on a 2004 Sterling Acterra Truck with a total of only 32,850 miles
  • CAT 3126 diesel engine @ 300 HP
  • Set Back Axle – Truck
  • Eaton Fuller RTO-11909ALL Transmission
  • Front Axle 18,000 lb.
  • Merito RT-40-145 R-SRS Tandem Rear Axle @ 40.000 lb.
  • 5.29 Axle Ratio
  • 219 inch wheel base with 60 inch rear axle spacing.
  • Mast, 28’ 6” Travel Special
  • Slow Feed Drill-Up Valve
  • Upgrade Traverse Cylinder, 28’ 6” Travel
  • Increase cylinder rod diameter to 2.75”. Pulldown increased to 22,000 lbs.
  • Pullback decreased to 27,000 lbs
  • Rotation Motor, 40.6 cu.in
  • Top Head, Single Motor, 28.5’
  • Top Head Rotation
  • RPM 0-110, Torque 75,390 in.-lb.
  • Split Table Assembly, 4 ½”
  • Several custom bushings, Custom made hydraulic open & close table
  • Breakout Wrench 60”
  • Heater, Electric Deck Engine Block
  • Tool Lubricator, Piston Pump
  • Stand Pipe, 2” Aux Mud
  • Out riggers , Rear Two 4 inch bore, 36 inch stroke
  • Front out rigger , Special
  • Custom built, telescoping outrigger, Truck hood can be completely opened, no butterfly doors required
  • Jib Boom, Hydr Swing & Extend
  • Lazy Susan, 8 rod BO (4.5”)
  • Sliding Top Head, Hydraulic
  • Auxiliary Winch Controls
  • Winch 9,600 lb. (150’ x ½”)
  • Foam Injection, Cat 35 GPM
  • Model 3520: 23 gpm @ 2000 psi
  • Angled Rack, 18 inch rise
  • Pipe Rack, 2w x 4h
  • Full Side Walkways
  • Extra Service Air Lines plumbed in
  • Drill Pipe (4.5” x 3 ½ API Reg x 20’)
  • 500' feet of Drill Pipe 20' x 4-1/2" included
  • Accessories included with Rig
  • Wilden M-15 Mud pump and hoses
  • Mud pit, (carried under mast while moving)
  • Stabilizer Bar (12 foot x 7 inch), (mounted inside mast)
  • Stabilizer Bar for 8 inch hammer, (kept as a unit and mounts on the side of the mast)
  • Running IR, QL60, and QL80 hammers
  • Arc Welder, Hobart, Champion 10,000, low hours only 154
  • Barber Floating Cushion Sub, model PD6-2
  • X-Drill system and air activated diverter head
  • Controls and Divertor Head mounts in minutes
  • Misc., Tri-cone and Hammer Bits, Wrenches, Bushings and Hoses included
  • Includes: A Service truck a 1992 Chevy Top Kick Truck with 1500 gallon water tank, 400 gallon fuel tank, and will handle 10 lengths of 6-5/8" O.D. well casing and 158,500 miles on gauge
  • Located in the N.E. Region


Back Print