2003 Schramm T130 Drill Rig Package - SOLD

Item No
4481
Condition
Used
Manufacturer
Schramm
Status
Sold
Model Year
2003
Model No
T130 Drill Rig
Quantity
0
Price
Sold
Description

  • SOLD
  • 2003 Schramm T130 drilling rig 
  • Sullair 1300 cfm / 350 – 500 psi 2 stage air compressor (Rebuilt with 0 Hours with new clutch, oil changed every 100 hours)
  • 53' ft H 130,000 lbs TeleScoping Tower (Handles Range 3 Casing), 4-Sheave Crown, 34,600 lbs Pulldown Cap, Single Rod Carrousel, 3" inch Standpipe & Rotary Hose, 20" inch Full Open Hydraulic Table
  • Funk Box In&Out
  • Mounted on a CCC (Crane Carrier Company) Truck with 5-Axle 8x8 Truck -
  • CAT C-12 @ 380HP Diesel Engine
  • FULLER 8-Speed Transmission
  • (3) Hydraulic Leveling Jacks
  • Swing Out Hydraulic & Gauge Console
  • CAT Triplex Mist Pump
  • GRACO Air-Op Downhole Lubricator
  • Hydraulic Utility Winch
  • 425/65R22.5 Front & 12R22.5 Rear Tires
  • Weight: 92,000 lbs, Height: 13' 6", Length: 42' 9", Bumper to Bumper: 30', Width: 8' 6"
  • Included as a package:
  • Sub Structure – extra heavy with folding ramp
  • Hammer oiler
  • About 3000' ft of (30' x 4-1/2") drill pipe (pressure tested)
  • 4 drill collars
  • 2 Numa hammers (one P120 & one N 100) with 14 inch bits – low hour with 1 new bit still in the crate
  • Several cross over subs for making pipe and collars up to 4-½ & 6-5/8 bits
  • Collar handling tools – we made up a set of lift nubbins, links and tubing elevators so the collars can be picked up and laid down safely – ($9800 value)
  • 2 cat walks that are 20' ft that pin together to run range 3 pipe and are easy to move
  • 4 pipe racks
  • Lay down cable for catwalks – so you can lay pipe down with the rotary head
  • V door
  • Casing structure that sets on the floor so casing crew has a safe platform to work
  • New working floor
  • New drillers stand with stairs
  • Deck catwalks with handrails and stairs the match up to the sub
  • Paint in Very Good Condition
  • Several tools made such as a joint of pipe and sub with a 17-½ inch bit to drill conductor casing (with this you don’t have to break a bit out) and a joint made up with a bit to drill a rat hole so the collars can be set in the hole with the lift nubbins safely

 

  • (1) Gardner Denver 7-1/2 x 12 Duplex Mud Pump (newer fluid end)
  • Powered by Detroit Series 60 Diesel Engine
  • Skid Mounted
  • Located: Southern Region, USA


Back Print